Summary
When a current I flows through a resistor R for a time t, electrical energy turns into heat: H = I²Rt = VIt = V²t/R (in joules). In calories divide by 4.18 (use 4.2). Pick the form that keeps the unchanging quantity: I²R when the current is common (series), V²/R when the voltage is common (parallel, or a fixed mains supply).
Electric power is the rate of energy transfer: P = VI = I²R = V²/R (in watts). One kilowatt-hour = 3.6 × 10⁶ J. A bulb marked (P, V) is rated for power P at voltage V. Its resistance is R = V²/P, taken as constant, so at another voltage V′ it gives P′ = P(V′/V)².
Key formulas
- Joule heat
- H = I²Rt = VIt = V²t/R
- Power
- P = VI = I²R = V²/R
- Bulb rated (P, V)
- R = V²/P, P′ = P(V′/V)²
- Unit of energy
- 1 kWh = 3.6 × 10⁶ J
- Same heat from fixed V
- t ∝ R; parallel 1/t = 1/t₁ + 1/t₂
- Line loss
- P_loss = (P/V)²R
- Load power
- P = E²R/(R + r)²
- Maximum power
- R = r, P_max = E²/4r, η = 50 %
- Resistance and temperature
- R = R₀[1 + α(T − T₀)]
What this note covers
- Joule heating
- Electric power
- Maximum power transfer
Solved past-paper question (JEE 2024)
Water boils in an electric kettle in 20 minutes after being switched on. Using the same main supply, the length of the heating element should be ____ to ____ times of its initial length if the water is to be boiled in 15 minutes.
- (A) increased, (3/4)
- (B) increased, (4/3)
- (C) decreased, (3/4)
- (D) decreased, (4/3)
Solution
The supply voltage is the same, and the heat needed to boil the water is the same.
H = V²t/R, so t ∝ R
Same material and cross-section: R ∝ l, so t ∝ l.
l₂/l₁ = t₂/t₁ = 15/20 = 3/4
The new length is 3/4 of the old one: the element must be decreased to 3/4 of its length.
Answer: (C) decreased, (3/4)
Common mistake: Thinking a longer element gives more heat. A longer wire has more R, so less power at fixed V.
The full note has 9 solved questions, 9 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.