Summary
Commercial cells are of two kinds. A primary cell (dry cell, mercury cell) is used once: its reaction cannot be reversed usefully. A secondary cell (lead accumulator, Ni–Cd cell) can be recharged by passing current in the opposite direction.
The lead accumulator (lead–acid battery) is a secondary cell used in vehicles and inverters. A single cell has an EMF of about 2 V, so a 12 V car battery has six cells in series.
Key formulas
- Charge passed
- Q = I × t
- Moles of electrons
- n(e⁻) = Q / 96500
- Cell EMF
- E°cell = E°cathode − E°anode
- Maximum work
- Wmax = −ΔG° = n F E°cell
- Dry cell overall
- Zn + 2MnO₂ + 2NH₄⁺ → Zn²⁺ + 2MnO(OH) + 2NH₃
- Mercury cell overall
- Zn(Hg) + HgO → ZnO + Hg (E ≈ 1.35 V)
- Lead accumulator
- Pb + PbO₂ + 2H₂SO₄ ⇌ 2PbSO₄ + 2H₂O (E ≈ 2 V)
- Ni–Cd cell
- Cd + 2NiO(OH) + 2H₂O ⇌ Cd(OH)₂ + 2Ni(OH)₂ (E ≈ 1.4 V)
- H₂–O₂ fuel cell
- 2H₂ + O₂ → 2H₂O (E° = 1.23 V)
What this note covers
- Dry cell and mercury cell
- Lead accumulator
- Nickel-cadmium cell
- H2-O2 fuel cell
Solved past-paper question (JEE 2019)
The anodic half-cell of lead-acid battery is recharged using electricity of 0.05 Faraday. The amount of PbSO₄ electrolyzed in g during the process is : (Molar mass of PbSO₄ = 303 g mol⁻¹)
- (A) 15.2
- (B) 7.6
- (C) 22.8
- (D) 11.4
Solution
Recharging reverses the discharge. At the anodic half-cell the PbSO₄ plate is changed back to lead.
PbSO₄ + 2e⁻ → Pb + SO₄²⁻ (2 mol e⁻ per mol PbSO₄)
Moles of electrons supplied: 0.05 F is 0.05 mol of electrons.
n(e⁻) = 0.05 mol
Moles of PbSO₄ electrolysed.
n(PbSO₄) = 0.05 / 2 = 0.025 mol
Mass.
m = 0.025 × 303 = 7.575 g ≈ 7.6 g
Answer: (B) 7.6
Common mistake: Using 4 mol electrons per mole of PbSO₄ (as if Pb⁴⁺ were formed) instead of 2.
The full note has 6 solved questions, 6 practice questions, figures and a topic test. Reading it on PrepKi is free after you log in.
PDF download is included in PrepKi plans. See plans.